Processing
Likes
Comments
Share
Week 5 of flower cotton balls are forming Starting the heavy flower feeding and using the rain rings on the pots see video, so far so good just waiting for these ladies to bulk up I have one light that is getting replaced on the next grow as is has some leds not lighting up so its running at 70% and the plant in the lower left corner is showing it its way smaller than the other 5,,, oh well, till next time be safe.
Likes
10
Share
@Hix57
Follow
Le 41e jour avec mes précieuses plantes se déroule en douceur. Je remarque un léger jaunissement sur quelques feuilles, peut-être le début de la floraison, un besoin d'azote, ou simplement un processus naturel. Pour remédier à cela, je vais leur offrir un peu d'azote et observer les résultats avec attention. En parallèle, j'ajuste progressivement les niveaux de phosphore et de potassium, veillant à éviter les excès qui ont pu survenir par le passé. Chaque jour, je m'efforce de progresser et d'accumuler de précieuses expériences. Je vous remercie de me lire et de me suivre dans cette aventure 🙏🌱 Remarque : Engrais : phosphore et potassium augmenté très légèrement. Ajout d'un peu d'azote. Symptômes : léger jaunissement des feuilles comme dans toutes les cultures au 38e/40e jour. Problème toujours a identifier.
Likes
36
Share
@Regenwurm
Follow
Die Bedingungen sind perfekt, ich bin mit der Entwicklung sehr zufrieden. Diese Woche ging es in die Blüte, Lichtleistung wurde erhöht und es wurde heftig entlaubt um den versteckten Trieben Licht zu geben. Tage der Keimungsphase = 7 Tage. Tage in Wachstum = 21 Tage Tage in der Blüte = 7 Tage Wachstum h Woche 1 Blüte = 10 cm 2 mal in dieser Woche mit Purolyt Mischung 1:25 besprüht Lichtstärke: 90 % PPFD: ca. 850 umol Lichtabstand: 40 cm Std Tag/Nacht: 18/12 Temperatur Tag: ca. 25 Grad RLF Tag: 60% Temperatur Nacht: 21 Grad RLF Nacht: ca. 60 % VPD Wert: ca. 0,9 PH Wert Wasser/Düngelösung: 6,3 EC Wert: nicht gemessen Ventilator Oszillation: Stufe 1 Befeuchter: an Entfeuchter: aus Zusätzlicher Entfeuchter: 0 Stk. außerhalb vom Zelt im Raum Bewässerung: 2* bewässert 1 l/Pflanze mit Dünger mit den o.g. Mengen 1 * pures Wasser mit 2 l/Pflanze Purolyt Besprühung: 2 mal Besprühung Fastplantspray : 1 mal Controlling: Grow Control Dünger: Greenbuzz Nutrients Licht: Pro Emit Vollspektrum Abluft: EC Carbon Active 750 m3 Danke an Zamnesia für die Seeds, den sonstigen Merch und natürlich das Vertrauen in die Kooperation https://www.zamnesia.com/de/10681-zamnesia-seeds-pineapple-express-f1-automatic.html Danke auch an Mia von GB: https://greenbuzznutrients.com/de/ Ihr bekommt 25 % Rabatt bei der Nutzung des Codes auf der GB Homepage https://greenbuzzliquids.com/de/shop/ Code: GD42025 (Mindestbestellwert 75€)
Likes
30
Share
I have been using LST in the form of a fan on medium speed to try and strengthen the main stalk of the plant as well as planter rotation to strengthen the main stalk for tie down LST. So far I've been impressed with the rate of growth and the overall experiment. For what it's worth, the growth wth is very very similar to a hydroponics growth. I'm sure as the experiment continues I'll notice some big differences. It does appear to have either a minor potassium deficiency or a little too much nitrogen. Will monitor and update as needed. The above signs may have been trying to indicate the main stalk was weakening from too much weight from vertical grow rate. This would ultimately lead to a fractured stalk. Is this what happened or is it a fungus or disease problem? Plant C sprouted within 48hrs and will be 6 days behind Plant A. End goal of harvest is still 360g from the two plants combined. Both plants are looking very happy regardless of the toxicity or deficiency. Strong strain nonetheless.
Likes
39
Share
@SamDo
Follow
Extrêmement satisfait de cette variété. Un vrai cauchemar pour les ciseaux tellement elle colle!! Comme pour la critical, j’aurais aimé récolter plus, mais je vais essayer d’améliorer mes compétences, et puis peu être par la suite augmenter la puissances de la lampes. Elle est vraiment riche en cristaux. Je reviendrais faire un update après le smoke test.
Likes
7
Share
@Eddjack
Follow
Sta esplodendo si iniziano a definire le prime cimette. Inizia a emanare anche un buon profumo molto fruttato, per fortuna esistono i filtri ai carboni attivi. Ora sta solo ad aspettare dopo le carenze iniziali si e ripresa alla grande vedremo in futuro che succederà. Dajeforte growes
Likes
12
Share
Hello everyone, I've had a busy week, so this is what I have for you guys See y'all next week 🤘🤘
Likes
2
Share
So many leafs are coming back strong. Next Week I think the stretch will be done, so I can do the final defoliation in this grow Space for better overall light penetration.
Likes
16
Share
@Raizativa
Follow
Germinaron en vaso de agua durante 4 a 5 días
Likes
23
Share
First 7 days of the Strawberry Gorilla from Fastbuds. She was germination in glass of water than move to cotton and in 2 days it had more than an inch of root so i moved to her home 12 liters pot with biobizz,coco peat and perlite for the vegitation she will have the Marshydro Ts 600 in 80 x80 grow tent.
Likes
2
Share
@Sators
Follow
Day 16 – Strengthening Outdoors Begins Today marks the 16th day for my CBD Auto 20:1 from the 420 Fast Buds collection. The little warrior is continuing to show good progress! After a few days of gradual hardening off, I started taking the plant outdoors twice a day – once in the morning and once again in the afternoon – to introduce it to real sunlight and gentle outdoor conditions. Each session lasted around 30–40 minutes, depending on the temperature and light intensity. The weather has been quite typical for spring in Ramsgate: a mix of cloud cover with bursts of sun, with light intensity varying between 600–1100 μmol/m²/s. The plant seems to be adapting well – no visible signs of shock or stress so far! At the moment, I’m still cautious about leaving it out all day, as nights are still a bit too cold for such a young seedling. But I can already tell: the stems are starting to strengthen, the leaves are becoming slightly thicker, and the plant is gaining confidence facing the outdoor elements. This is a special project for me – a true budget-friendly outdoor grow, where I’m letting the natural light and environment shape the plant’s journey. No artificial supplementation – just patience, observation, and care. Looking ahead: In the coming days, if the temperatures stay kind (especially the mornings), I plan to gradually increase the time outside, and soon transition the plant to full outdoor life. Step by step, no rush. Overall feeling: Happy with the plant’s spirit and the direction this grow is taking. The bond between grower and plant grows stronger with every little sun session! Day 19 – Full Sun Adventure and Hydration Today marks a big milestone for my CBD Auto 20:1 plant – its very first extended outdoor session! The weather has been absolutely perfect, with bright, strong sunshine all day long, delivering a consistent light intensity above 1400 μmol/m²/s. Feeling confident after a successful hardening-off phase, I kept the plant outside from the afternoon well into the evening, enjoying the natural elements. To support the plant through this sun-filled day, I provided a generous watering with 1L of clean, pH-balanced tap water. I continue to carefully oxygenate the water before use, promoting healthier root development and stronger overall growth. The plant is responding beautifully: Leaves are vibrant and standing tall. Stem is gaining thickness and resilience. Overall growth structure looks compact, healthy, and well-adapted to natural light. I’m very pleased with the progress. If temperatures remain favourable tomorrow, the plan is to move the plant outside from early morning and allow it to enjoy the full day’s cycle under natural light – another important step towards full adaptation to outdoor life. One day at a time – and the journey continues! Day 20 – First Full Outdoor Day! Another big step forward for my CBD Auto 20:1 plant! Today, for the first time, I moved the plant outdoors for the full day to enjoy the natural sun and fresh air. The morning started strong, with a bright clear sky and an impressive light intensity of 1600 μmol/m²/s. The air temperature was a perfect 22°C, giving the plant ideal conditions to embrace the full outdoor environment. Observations: Leaves are standing tall and reaching toward the sun, showing excellent energy and adaptation. The stem is gradually thickening and strengthening, becoming more resilient with each day. No signs of stress or drooping, even under intense midday light. Environmental Conditions: Full sun exposure throughout the day. Light breeze, but nothing too strong – just enough to naturally strengthen the stem. This is a major milestone, and the plant looks truly happy and energetic! From here, the focus will be on gradually adapting it to full day-night outdoor conditions, allowing it to thrive naturally under the UK summer sun. The outdoor adventure has officially begun – and Sators is back in the race stronger than ever! Day 21 – Surviving the Heatwave, Growing Stronger Another exciting day for my CBD Auto 20:1 grow! The weather gave us a real test of strength yesterday, and my little warrior is showing amazing resilience. Conditions: Peak sunlight intensity: around 2000 μmol/m²/s – incredibly bright and intense! Temperature in direct sunlight: reached up to 35°C during the day. Nighttime temperatures still remain low, so for safety and steady development, the plant continues to be brought indoors overnight. Despite the daytime heat spike, the plant handled it impressively well: Leaves are vibrant and wide open, reaching confidently towards the light. Stem has gained more thickness, showing clear signs of strengthening after the outdoor sessions. No visible stress such as leaf curl, wilting or discoloration. Observations: The combination of intense sunlight and warm temperatures has definitely accelerated photosynthesis and growth rate. At the same time, careful night protection ensures no shock from the colder UK nights. Balancing between the power of the sun and the comfort of indoor shelter is paying off! It’s fascinating to watch the plant adapt to real outdoor forces day by day – it’s growing not just bigger, but stronger, smarter, and more resilient. The outdoor training continues… and so does the journey of “Sators” in this race!
Likes
19
Share
After locking them out for close to a week , I managed to get them going again. Just waiting for some Amber trichomes to show up now.
Likes
42
Share
Bonjour à tous les padawans et les maîtres jedis Cette plante est vraiment exceptionnelle! Elle représente la force et j'en suis fier 😍 La semaine 4 est déjà la ! Ma plante est saine le LST ce passe relativement bien je l'ajuste tout les jour je le combine avec la technique du pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Le pinçage est une pratique courante en horticulture. Beaucoup de cultivateurs l'utilisent pour améliorer le rendement de leurs plantations cannabiques ou autres. Il est souvent question de 'taille' des bourgeons apicaux. Cette taille se pratique également mais il n'est plus alors, à proprement parler, question de pinçage. A l'instar d'une taille, le pinçage va permettre de stimuler le développement des ramifications tout en préservant les sommités en vue de la floraison. Il est très utile pour uniformiser une canopée. Pour réaliser le pinçage, il vous suffit de presser 'fermement' la tige [entre le pouce et l'index] aux environs de l'apex jusqu'à sentir un léger 'crAck'. Cela aura pour résultat d'endommager les vaisseaux impliqués dans la circulation de la sève [situés dans le pourtour de la tige], la tige conserve toutefois une certaine rigidité. Pour obtenir le même résultat, il est également possible de vriller légèrement la tige sur elle-même. L'interruption du circuit d'alimentation entre le ou les apex et le reste du plant va provoquer un déséquilibre hormonal qui aura pour conséquence le développement des ramifications antérieures au point de pinçage. Jour 25 j'arrose mon pot normalement avec un quart de son volume en eau toujours avec un PH de 6.3 à cette eau j'ajoute 0.7 gramme de greenhouse feeding enhancer pour favoriser son développement racinaire. Par la suite je n'aurai plus qu'à ajuster mon LST jusqu'au stretch et surveiller mon arrosage, Je pincerai mes apex suivant la pousse de la plante pour uniformiser la canopé. Petit rappel de ce que est le LST et comment le pratiquer le plus efficacement possible: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Je combine un pincage d'Apex (explications plus haut) au LST cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Que la force soit avec vous 💪
Likes
16
Share
@Dunk_Junk
Follow
She is developing the fastest out of the 4 plants. Growing well this week.
Likes
3
Share
@Xabii
Follow
Had to do a root wash, again, also cut some really bad roots of, also saw lots of new healthy root growths since last week, upping ORP and wash last week seemed to have helped. Overall still very unhappy but that is on me, learned that prepping a plant in DWC and then transplant it to NFT is not a good idea, better do it as usual directly in NFT so that the roots follow the stream better, usually at this time there would be at least 3x the amount of roots. Also switched back to the 10cm diameter tube, will stick with that one from now on, very good experiences in the past and this one does not, maybe RH does not rise enough in a 16cm diameter tube. Also changed the light cycle to 18/6 from 24/0, in the timelapse I see phases where the leafs droop slightly and come back, kind of like the night cycle but less, seems to me like the plant wants to go to "sleep" even tough it was raised in 24/0 and I have good experiences with 18/6. Values are average of the day. DATE - EC(us/cm) 20250430 1952 20250501 1649 20250502 1722 20250503 1735 20250504 1719 20250505 1750 20250506 1796 DATE - PH 20250430 6.03 20250501 6.24 20250502 6.27 20250503 6.24 20250504 6.21 20250505 6.15 20250506 6.13 DATE - ORP (mV) 20250430 259 20250501 248 20250502 225 20250503 233 20250504 222 20250505 235 20250506 307 DATE - °C - RH% (Tent Temp/RH) 20250430 25.9 42 20250501 25.4 47 20250502 26.6 48 20250503 24.2 51 20250504 23.7 46 20250505 24.5 45 20250506 24.0 47 DATE - °C (Reservoir) 20250430 20.4 20250501 20.4 20250502 21.7 20250503 21.1 20250504 19.5 20250505 19.3 20250506 19.6 DATE - CF 20250430 19.52 20250501 16.49 20250502 17.22 20250503 17.35 20250504 17.19 20250505 17.50 20250506 17.96
Likes
8
Share
Only Compost tea mix Worm,cow,fish, rabbit, chicken, two pieces deployed late
Likes
6
Share
Likes
12
Share
Week 4 has begun. LST (Low Stress Training) is starting to show its effects: most of the shoots have grown past the rim of the pot and are being tied down further away from the center—this will continue until the stretch begins. During the stretch phase, no further training will be done; the plants will be allowed to grow upwards undisturbed. I’m curious to see how many shoots will be in the desired position by then, and whether all the shoots or bud sites will be on an even level after the stretch. Until then, defoliation will continue as needed, and tying down will be adjusted accordingly.
Processing
Likes
5
Share
Entrando ya en tierra derecha 😑😑😑😑 Modo zen en este proceso, ser paciente estar atento al engorde y esperar. 🤯🤯🤯 Así va el mix fem en sus últimas 3 semana 4 semanas para el corte 🌲🌲 Una de las #critical47 de @positronicschileoficial es la que estará primero y ya podemos ver que lograremos plantas sanas y limpias al final. Las de mayor producción son las #fatbanana y la #greenpunch. La deaoyr resina hasta el mentó es una de las #critical47 y las #Toxic. Durante todo el proceso y desde hace ya 5 años confiamos el cultivo a los fertilizantes de @topcrop. 🍒🌽🍍🌼💐💮