comenzamos a ver esas flores

Let’s Go day 29!! This week went real nice ! Girls are staying very healthy and building up nicely and even started showing signs of female sex which is super great ! We started doing a little bit of leaf tuck training method on em , nothing to big as like I said I want these girls just to do there thang an grow more on naturally side! My Air temp and Humidity have been on point all week, staying from 70-75 degrees throughout the day and humidity staying around 58-61% humidity , my girls are loving that summer an 75 feeling !! Can’t wait to see what we do this week ! Hopefully you all enjoy, and are ready for another great productive week ! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻Happy Grows✌️🏻Week 4 let’s get it !

Everything is fine i saw some fading on 2 plants but i think cold weather + molybdenum deficiency caused that purple color so i add some micro elements include molybdenum. this week is warm again and i love it smells like candy but 2 of them got some sour aroma to :) I believe they need more than what breeders say in my climate they say8/9 w but i think at least 10 w they need to mature maybe hot climate causes this

! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: after 48 hours of complete darkness (important for seedlings to make sure all plants switch into flower same time), I finally switched my lights to the 12/12 schedule and sent my ladies into the flower. - both Phenos super strong and praying up, - more than healthy and going well - Day 3: Foliar spray with APTUS Regulator and APTUS Nutrispray to give them extra micronutrients and give them a little shell for protection. ! always use APTUS Regulator first and mix well with your water before adding any other nutrients for Feeding or Foliar! Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) 🌱 --- 🏷️ PEACH GIRL by Art Genetix https://www.artgenetix.world/product-page/peach-girl --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique

Still drying in my wardrobe on hangers with a rotating fan and a mini dehumidifier. Harvested when the dirt were really dry. Splitted the stems to dry correctly.

Needed a little cal mag. Moved the plants to a tent and I haven’t seen signs of needing to feed but it’s the 5th week so I added mutes at a weaker strength. Also started using molasses week 4 once or twice a week

I’m flipping 12/12 this evening. I had a little tip burn on a couple of leaves of the Fullgas. These were in the central area of the light so I just eased off a little on the light intensity and haven’t noticed any issue since. It’s also a little dark atm so will hold off adding the bio grow until next week. Update ** Ive upped the light power by 10% again and watered in 4ml of Alg a mic in 2L of water.

Les racines sortent du pot seulement 48 après le rempotage, incroyable, très vigoureuses et saine, sa annonce du très lourd , sa plaisante pas chez kannabia 💪👌

Pues ya llevan 22 dias a 12/12 horas de luz, han cambiado mucho en estos ultimos dias, ya esta empezando a formar sus flores llemas de pistilos!!

Added a 2nd trellis, she stretched more than I thought

This week consists of July 23, 2022 thru July 29, 2022 - Seeds were planted on May 27th, 2022 and they all sprouted on May 31st, 2022 (~4 days) Continued on schedule of 2 times do feed and then one water with only PH'd water. LIGHTS: I'm running the lights on an 18-6 schedule. I have the dark time scheduled from 11am to 5pm since the lights increase temperature and during that time the outside temperature is at its highest so it seems to be easier to maintain proper temperature ranges with the light off during that period. Swapped out the metal halide bulb to the high pressure sodium on July 6th since the plants have been in flower. WATER: July 23rd: ~1500 ml of 6.1 PH and 1500 PPM. 30 ml/gal of Big Bloom 0 ml/gal of Grow Big 15 ml/gal of Tiger Bloom 0 ml/gal of Cal-Mag July 25th: ~1200 ml of 6.1 PH and oxygenated water July 27th: ~1500 ml of 6.1 PH and 1500 PPM. 30 ml/gal of Big Bloom 0 ml/gal of Grow Big 15 ml/gal of Tiger Bloom 0 ml/gal of Cal-Mag July 29th: ~1500 ml of 6.1 PH and 1500 PPM. 30 ml/gal of Big Bloom 0 ml/gal of Grow Big 15 ml/gal of Tiger Bloom 5 ml/gal of Cal-Mag TEMP/HUMIDITY: A max of 90.0F and a min of 62.8F with an average of 78.8F. VPD was harder to maintain this week since it was in the high 80s and low 90s outside with the average being around 1.59. Whole week numbers> Temp - 78.8F avg - 62.8F min - 90.0F max Humidity - 52.7% avg - 21.0% min - 83% max VPD - 1.59 avg - 0.40 min - 3.20 max CO2: Floating ball is between .5 and 1. This lets a more gradual amount of CO2 to enter the tent and I now get a more stable level of CO2 that fluctuates between around 1000 ppm and 1300 ppm. The regulator is still plugged into the same outlet as the lights so it turns off on the same light/dark schedule. PAR: PPFD between 300-1500. The tops of some plants are getting the 1200-1400 range and some side leaves are getting in the 400-700 range. ISSUES: Nothing new. TECHNIQUES: I implemented some minor defoliation on some of the affected leaves and some leaf tucking.

This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)

First week of flowering! I chose to also do some lst on this lady, a bit of a different approach. She survived a couple of very warm days(32°C). The lower leaves started to die off so I used some more nutes. Watered with 2l(nutes), 1,5l(no nutes) and 2l(nutes). She is starting to smell a bit also, looking forward to seeing the buds!

Bye bye week 6! Hello week 7, The biggest lady 90cm, 2nd 85cm and little one 75cm. The little stopped growing and started flowering one week before the other 2 ladies. Don’t know why. She also got this yellowing leaf’s early in veg phase. But it seems that she is producing nice buds. The other 2 ladies look very good and they have lots of flowering spots. Didn’t do any Lst, only very little defoliation. Don’t they look beautiful ? Love them love cherry cola

26. Oktober Runtz keimt minimalistisch. Ähnlich wie bei beiden Cookies. Runtz ist jetzt im 11l Topf Beten wir dass es klappt Tropimango alles gut Cookies gelato alles gut. 28. Oktober Cookies gelato wächst nun deutlich schneller. Tropimango wird ebenfalls schneller. Wachstumphase hat begonnen. Habe das erste mal den Wurzel Dünger und den blattdünger angewandt. Runtz noch nicht sichtbar 29. Oktober Die runtz ist klein sichtbar Cookies gelato macht was es soll Tropimango auch 1. November Cookies Gelato ist nun 17 Tage alt und sieht tip top aus. Das sehr misslungene Umtopfen hat sie gut verkraftet. Tropimango ist nun 14 Tage alt. Sie ist deutlich kleiner und die Blätter haben eine interessante Färbung. Sie wächst deutlich langsamer (Genetik ist auch deutlich kleiner) aber wirkt sehr lebendig. Runtz ist nun 3 Tage alt und sieht gut aus.

Still lookin happy, water only around 6.5 ph. I will start some LST next week 👍🏼 I will also give a 1/4 dose of advanced nutrients sensi cal mag next week because that's one issue I've ran into, usually nearing flower and I feel weekly small doses helps negate any issues. LED lights seem to increase the need for cal mag at least in my environment. The auxiliary shoots off the main are interesting! It's definitely going to be more of a bushy structure and fun to LST! ✌️🏼 ♥️

In