Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Likes
8
Share
- 12/12: Transplanted remaining plants to 5 gal. pots. They seem to have taken it nicely and 24 hrs later I think they look bigger. - 12/12: Did some more defoliation on lower growth for light exposure. - 12/12: fed 0.5ml/L of alg-a-mic and 1ml/L root juice to transplanted plants and Bio Bloom 2ml/L + 0.5ml/L Cal-Mag feed for Cream Felanitx. Ph: 6.5 Saw some yellowing on lower big fan leave and lower leaves dropping because I was late for watering for 1 day. Some peole say the yellowing. is normal this far ir veg. Rest is ok and the plants seem to have loved their food.
Likes
4
Share
@CalGonJim
Follow
4/22/24 🍓z I was going to take her down after I trimmed off all of the excess leaves and gave her some of the leftover maximum strength food from a space panda in the next tent. She really started taking off again, so I’m gonna keep her going. I’m gonna keep them all going and doing just great really starting to put out a lot of resin. They smell fantastic. I’m having a lot of fun with them so I’m gonna keep them going. I could take them down right now they are ready, but I just wanna grow them a little more. 👍👍👍 4/23/24 Wow they are great. ZStraverriez...hard to type.... is READY! I took the leaves off a couple days ago to see if I would get any growth but nope. So I will use FloraKleen 10ml per gal and do a 2 or 3 gallon flush and put her back in for a day. I harvested the CBD. It smells like berries, just great just the right size in a 2 gallon pot with no training. I found a seed in the CBD, the others might be seeding as well......that is my oldest tent probably has pollen somewhere. Still everything is good, but im getting a new tent...I also just got a MarsHydro light for 100 it's the light bar one. 4/23/24 Apricot and straw. gorilla are growing good. Zstraberriez....which is a HUGE BITCH TO SPELL....but WOW smells like berries and vanilla and happiness. I let some dry for a few hours and put it in the Arizer X2 and she was great. These are so fast and the colors are beautiful too. It's like a perfect autumn day with all the leave changing color. Except my colors are way better and I can smoke them.... 4/24/24 🍓🍓🦍🍑👍💎💎💎 I am seeing lots of resin form. I thought they would be ready to go, but it looks like they just kind of took a little pause and I trimmed off the unnecessary and fading leaves and they got their second wind and now seeing a lot of resin production💎💎💎. they smell great. They look like they’re ready to keep going for another two weeks so I’m gonna do that and I’ll just harvest a little bit along the way I smoke some of all of them this morning and they’re just great. 👍👍👍 4/25/24 I ended up doing a little bit heavier, feeding than usual. I did about 2 mL of all the supplements and now I’m seeing lots of resin. I’m very careful all the other nutrients have burned my plants horribly but I’m very careful in general. Hydroponic seems to do a good job without burning. Fastbuds has a 25 pack of all their different strains mixed together for 100. I might do that. I’m kind of neurotic. I may need to know what I’m growing I think about this. I really like all of their plants they have a personality all of their own. I like Seedsman and the F1 it’s from Royal queen seeds. 4/25/24 🍑🍓🍓 marsHydro FC-E1500. I just got this delivered today. It cost 100. Although it is a powerful amazing light is no good for me at home. The TS-1000 lights you can move the driver outside the tent and then the top of the light has a little resting tray. This one is totally for commercial use, you cannot remove the driver and its pretty heavy, sold construction all the way, but in my small space I’m gonna have to wrap this up and put it away. It’s a 10 out of 10 it’s a beautiful light super bright. It’s everything you want in a grow light for a commercial space but it is way too hot for a small 24” x 24” tent that I grow in. I have 3 tents and can't run lights over 90Watts or the room gets too hot, and I can grow 3 or 4 perfectly with the TS-1000 set at about only 90 watts, its just perfect. This will get far too hot in the small tent, unless I want to set my air conditioner to 72 and get a massive electric bill! so I’m gonna stick with these TS-1000, the most perfect home light for grow tents I have ever used. I’ll give this light away someday but the Mars Hydro TS-1000 is still the absolute best light I’ve ever used. I have 4 of them now. 4/28 🍓🍓🍑👍💦💦💦💎💎💎 I can’t believe the amount of res in that they are all starting to put out. They are really getting their second wind. I am just having a lot of fun with them so I’m gonna keep them going as long, probably for a couple more weeks at least until they are no longer viable, but I should be able to keep them going pretty good for a while. 👍
Likes
13
Share
Okay so my favourite batch of all. This plant smells soo citrusy and fruity! Its got a similar texture and smell to Amnesia. Ive been flushing these for the past week. Hopefully harvest these this week. Not bad for no training and topping. Ill be posting soon this week about the harvest! One love!
Likes
8
Share
Всем привет друзья! Растние растёт не по дням а по часам. Набирает жирок на шишках полным ходом. Очень хорошо кушает Цветёт и пахнет Всем мира и добра и хороших урожаев!
Likes
23
Share
I thought of it fungus gnats 😡 but I've already started deratization with nimba oil 😉 who helped me last time.
Likes
85
Share
@Grey_Wolf
Follow
Whew!! That was a Hot Week just past. Several days in a row of around 40 degrees followed by 38 and 39 degrees. Today however is Overcast and much cooler with about a 60% chance of rain later on. The Wifi plant hasn't seemed to mind the hot weather in fact she grew another inch or three. During summer and high temps it's beneficial for your outdoor grown plants to be given some Seaweed or Kelp solution. There is something in it that is fantastic for stress relief in all plants. It can be used at any time of the day and growth stage of the plant and is simply watered in or applied with a foliar sprayer. I also added to the soil 1 smalll scoop of Great White Mycorrhizal powder and Azospirillum. These are root innoculants that will keep the plants root zone healthy and happy. all thats needed is to thoroughly water it into the soil and your good to grow. I used my Bluelab soil ph probe to measure the soils ph which seems to be pretty stable at 6.5 so all good there not much else to report for now so I shall sign off for this week. Thankyou for checking in on my Diary update and because i wont be updating until after Christmas day I'd like to wish all of you a very Merry Christmas. Grey Wolf 19th December 2019
Likes
11
Share
D71/F23 - 11.29 - Maybe didn't love the defoliation, but looking ok. No discoloration or anything, just a little slower to start chunking up than its neighbors. <3 D73/F26 - 12.1 - The 3x3 9lb seems to have done better with the defoliation, but after I fed with a bit of molasses, found some fungus gnats flying around. Have traps and diatomaceous earth down, so we should nip this pretty quickly. D74/F27 - 12.2 - A little concerned about this one cola whose top pistils seem curled compared to the other on the plant. Take a look and let me know if this is normal or not. All my mature fungus gnats have been trapped, not seeing anymore buzzing around. I suppose the larva could still do a little damage for now? D76/F29 - 12.4 - Doing fine in the 4x5 tent :)
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 30/11/2019 - Struggling with high humidity, change led strip color from red,green,blue to red and green. 1/12/2019 - Checked and adjusted the light distance. 2/12/2019 - Pot feels light and dry, gave her 1,5l PH 6.3 with a 1/4 of recommended Biobizz nuts, notice almost no run off. 3/12/2019 - Finally her first pistil appeared on the main stem I was starting to get worried.
Likes
17
Share
Week 3 begins for DS and MD ladies. All four are developing nice bud sites, but the plants have not stretched as much as I was expecting they would by now. Thank you to Kaoritracy from Mars-Hydro for the TSW2000 light, I am very happy with it's performance. Thanks for stopping by growfessors 👽🌳💚
Likes
2
Share
Don’t plan on topping anymore
Likes
13
Share
Likes
35
Share
@valiotoro
Follow
A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 103g !! For the light i’ve used the Spider Farmer SE-7000💡
Processing
Likes
17
Share
@greennug
Follow
shortest plant is 50cm tallest being 95cm. They are all doing wonderfully, most of autos are budding nicely and all of the photoperiods are ready to flower. looking very promising. i am changing my light schedule to 14-10 to kick these girls into flower.. this will give the plants an extra 17% (or so) a day under the lights.rather than 12-12. i cant be fussy as i only have one grow space but if my research is correct these should grow beautifully! the autos are well ahead so shouldnt affect my harvest weight too much. like i say i cant be fussy! thanks for looking
Likes
44
Share
@Roberts
Follow
FBT2402 had a ph issue, and I got some spots on the leaves. I did not have her solution strong enough, and it jumped up on me. It's fixed now, and stable. Beside that she is starting to stack her colas. Hopefully I get a few ounces from her. Thank you Medic Grow, Fast Buds, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419