Processing
Likes
Comments
Share
@Sup3rNov4
Follow
Day 2. All the girls are coming along nicely one has a little heat damage to the main cola so redirected the airflow. almost all fan leaves are naturally falling off Cool little slide show of there life cycle. https://lightmv.com/v/mqatait] Link to Slide Show Day 4. So so so close to harvest I tried to check the trichomes but the scope got covered in THC 😂 and the iPhone 12 Camera sucks so can't get a picture of them
Likes
91
Share
@Salokin
Follow
Hi Growmies, I'm excited to share some big news today! Although there have been some unexpected twists, it's all part of the incredible journey of gardening. I've just completed the harvest, a tad earlier than initially planned, due to finding a bit of mold in one of the buds. Despite this minor hiccup, the trichomes were already at a decent 10% to 15% amber. So, all things considered, the timing ended up being pretty spot-on. The harvested weight was a solid 609 grams after trimming, which is quite a feat! A lesson learned for next time: perhaps I let her grow a few too many buds, leading to a denser canopy than ideal. But on the bright side, the aroma is absolutely divine. I sampled an airy bud that had dried a bit, and wow, it packs a stronger punch than its clone mother. And the flavor? Pure, unadulterated cheese – no hint of pineapple here! Now, the anticipation builds for the final dry weight, which I should know in about 3-4 days. It's always exciting to see the fruits of our labor fully realized. A huge thanks to everyone who's been following along on this journey. Your interest and support mean the world. And now, the adventure continues! I've started on Epic Buzz by Anesia Seeds. The diary for this new chapter is up and running, and the seedlings have already sprouted, marking the beginning of another exciting phase. (https://growdiaries.com/diaries/185718-grow-journal-by-salokin) I can't wait to share more updates with you all. Here's to the continued growth and learning in our gardening adventures!
Likes
5
Share
@Ensign420
Follow
Week 02 Introduction This week has been a bit of a struggle. Had my first experience dealing with slime and brown algae. But I think adding enzymes and increasing the beneficial bacteria helped to fix the issue. Also experienced nutrient burn for the first time. My nutrient solution strength got as high as 671 PPMs. So backed it down to about 430 PPMs during the end-of-week reservoir change. Also cut Hydroguard (expired?), CaliMagic, and Superthrive from this grow. Now she's still stunted, but is starting to recover. Hopefully... [START OF WEEK 02] Day 01 - Monday - 08/10/20 - Total Days: 008 ----------------------------------- - [0830]: Still looks a bit yellow. But getting larger! --- Solution strength was at 248 PPMs. --- Just topped off with a bit of distilled water --- PH went up to 6.1 so PH'd down to 5.8 --- Ran the top feed for a bit to wet the hydroton. - [2130]: She's looking even more yellow now. --- Even the new leaves are really yellow. --- Decided to add more base nutes. --- Added 4ml of Sensi A --- Added 4ml of Sensi B --- Now at about --- Solution Strength went up to 304 PPM. --- PH was at 6, --- Also raised the water level a bit more. --- I really hope it's a nutrient deficiency and not an over-watering issue. --- Please live! Day 02 - Tuesday - 08/11/20 - Total Days: 009 ----------------------------------- - [0830]: Looking less droopy. But still yellow. --- Decided to do a reservoir change. --- 4.5gal of distilled water --- 8ml of Sensi Grow A --- 8ml of Sensi Grow B --- 8ml of Voodoo Juice --- 4ml of B-52 --- 4ml of CaliMagic --- 4ml of Hydroguard --- 4 drops of Superthrive --- PH'd down to 5.8 --- Solution strength: 302 PPM --- Since I didn't want to risk over-watering the rockwool, I did not to do a top feed, may do one tonight after the sleep cycle (lights are still set to go off at 10am and back on at 4pm). --- As I was doing a reservoir change, I noticed that the tubes and bucket were a bit slimy. Didn't really stink or anything. Is this normal? Maybe due to the Hydroguard and Voodoo Juice? --- I hope she gets better soon! - [2215]: Getting larger! But still yellow. --- Also can see a root growing through the net pot! Tiny little thing but it's there! Will have to start dropping water once more appear. --- After looking over a few DWC diaries using AN nutes, seems like my solution strength is still too low. Most around this stage average around 500 PPMs with about 4ml per gallon. --- Top fed for a minute to wet the top of the hydroton. --- Solution strength went down to 263 PPM. --- Added 8ml more of Sensi A --- Added 8ml more of Sensi B --- Now base nutes are at 16ml for 4.5 gal of water. --- PPMs went up to 411. --- Still lower than 500 PPMs, but that's okay. --- PH was at 6. Not sure if I should adjust PH using AN nutes. So going to not ajdust unless PH goes above 6.1. Day 03 - Wednesday - 08/12/20 - Total Days: 010 ----------------------------------- - [0830]: Looks like more root growth! --- She still looks yellow. But leaves are perky. --- PH was at 6.2 so lowered down to 5.8. --- Solution strength was at 394 PPMs --- Since roots are still growing, I decide to lower the water level a bit. Now water level is a bit below the net pot. - [2200]: Root is getting longer! --- Slime is returning. Not sure why. --- Solution strength: 357 PPMs --- PH: 6.1 --- Decided to add an enzyme along with more beneficial bacteria to hopefully cure the slime. --- Added 16ml of Sensizym --- Added 5ml of Hydroguard --- Added 8ml of Voodoo Juice --- New solution strength: 430 PPMs --- New PH: 6.1 --- Top fed for a minute. --- This slimy residue is really freaking me out! I hope the added enzymes will help eliminate the slime. --- Going to do a full reservoir sterilization/nutrient change over the weekend. Please survive until then girl! Day 04 - Thursday - 08/13/20 - Total Days: 011 ----------------------------------- - [0930]: I think the enzymes worked! There is little to no slime now! --- Although I think the root was also dissolved in the process. It's now just a little stub sticking just below the net pot. The enzyme is also suppose to dissolved dead roots too but guess that root was too weak? Not sure what happened there. But I think the slime is cured! --- Solution strength went down to 395 PPMs. Decided to add more base nutrients. --- Added 8ml of Sensi A --- Added 8ml of Sensi B --- Added 4ml of B-52 --- Solution strength went up to 598 PPMs. --- PH was at 6.1 --- As long as the PH is between 5.5 and 6.3, I'm not going to use PH Up or Down. But still will monitor PH levels. - [1715]: Checked up on her after her nap and shes looking alive but stunted. But no slime! --- Decided to add some sugars to help maintain the enzymes and beneficial bacteria. --- Solution strength was at 587 PPMs. --- PH was at 6.2 --- Added 8ml of Bud Candy --- Solution strength went up to 671 PPMs. --- PH also went up to 6.3 --- Lowered water level a bit to hopefully promote more root growth. --- Top fed for a minute. --- She is getting bigger, but still looks yellow. Day 05 - Friday - 08/14/20 - Total Days: 012 ----------------------------------- - [0915]: Leaves look a little burnt on the tips. Still no slime. --- Going to back off on the PPMs to hopefully fix the nutrient toxicity. --- Solution strength was at 632 PPMs --- PH was at 6.3 --- Added/Removed water until PPMs were at 536. --- PH was still at 6.3 --- Raised water up a bit, then top fed for a minute. - [2200]: Looking better. Still yellow though. --- Solution strength: 514 PPMs --- PH: 6.5 --- Added PH down. --- New solution strength: 518 PPMs --- New PH: 5.2 --- PH was kind of high. So decided to PH down. Had to use quite a bit to bring it down. But eventually got it to drop down to 5.3. A little low, but so far, the PH has always gone up so wanted to start it really low. --- Ran the top feed for a minute to re-saturate the top of the hydroton. Day 06 - Saturday - 08/15/20 - Total Days: 013 ----------------------------------- - [0830]: She looks stunted. leaves are still yellow. --- Solution strength: 514 PPMs --- PH: 5.6 --- Top fed for a minute. --- Not sure what to do at this point. Going to do another reservoir change soon. Hoping she lives until then. - [2145]: Looking pretty much the same. --- A bit of slime has returned. Since I've been diluting the nutrient solution, the enzyme ratio has dropped. So I guess this is expected. --- Also noticed that slime build up was on the air-stones. Never really checked the stones so not sure how long that has been there. Looks brown too, which can't be good. --- Going to do an H202 sterilization of the system (minus the net pot) tomorrow so did not add anything. --- Lowered the water level to below the net pot. --- Then top fed for a minute. Day 07 - Sunday - 08/16/20 - Total Days: 014 ----------------------------------- - [0900]: STERILIZATION DAY! --- Decided to skip today's night cycle for a deep clean. --- I'm hoping that skipping a night cycle won't be too stressful. --- Temporarily moved her to a new bucket. --- Used about a half of gallon of straight distilled water to flush out the net pot. --- Drained the system and wiped up all the brown sludge. Also removed the air stones and cleaned up all the goo. --- Filled the system with 2 gallons of distilled water and at least 30ml of food grade hydrogen peroxide (35% strength). --- Yea its a lot, but since I'm not going to sterilize the system overnight, I went with a really high doseage. Basically I kept adding until I started to see little bubbles start to form. --- Then I ran the water pump. - [0915]: Boiled the air stones in tap water for about 10 min. Then reconnected them to the airlines. --- I let the air stones and hose soak in the sterilization solution for about 5 minutes so the peroxide can absorb into the stones. Then ran the air stone to help mix and agitate the solution. --- Occasionally, I'd repeat the process of turning the air pump off for a few minutes to let the stones soak. - [1000]: Covered the top two row of holes of the net pot with some aluminum tape. Hopefully this solves the light leaking in through the hydroton. - [1200]: Used an old toothbrush and scrubbed the pump clean. Then drained the system. --- Refilled with more distilled water and peroxide. Again added a lot. --- Ran system again to sterilize even more. - [1530]: Drained the system and refilled with distilled water to rinse. --- Ran the system for a few minutes, then drained and rinsed again. --- Did this a few more times over about an hour. - [1630]: Added 4 gallons of fresh distilled water. --- Added 15ml Sensi Grow A --- Added 15ml Sensi Grow B --- Added 12ml of B-52 --- Added 16ml of Voodoo Juice --- Added 16ml Sensizym --- Solution strength was at 430 PPMs --- PH was at 5.6 --- I was going to add Hydroguard, but I think the bottle is expired. Since 2017 or 2018!? I think Hydroguard is good for up to 2 years from the date on the bottle or 6 months after opening. So not going to use from now on. I wonder if this could have contributed to the slime build up. --- Also removed the CaliMagic and Superthrive too. Going to only use AN products to eliminate the chance of incompatible nutrients. --- Placed her back in the bucket and top fed for a minute. --- Here's hoping for the best. Going to let it ride until morning! Please feel better! [END OF WEEK 02]
Likes
5
Share
@RoyColt
Follow
Always R.O Water Watering the plant 3 times for per week 1st Watering with nutriens. 2st Watering with nutriens. 3st Watering with only R.O water & CalMag
Processing
Likes
28
Share
Surf Purp Week 6 Flower The last week before flush. All nutrients apart from PK and sugars have been stopped. This brought the ppm/EC down, plus Remo Bloom was reduced slightly now they're not so hungry. With that being said I'm still using a lot more with this line than I'm used to. Only because the remo nutrients feeding chart lists them so strong, which I'm already a lot lower than. In future I'll try reducing them and see how they cope and perform, but that's just part of dialing it in to your own specific set up. Now that they're close to flush they're starting to get slightly more pale, with #2 and #4 showing some purpling too. This is because they are slowly coming to the end of their cycle, so they no longer need heavy feedings and are now eating less and beginning to cannibilise. They're all very frosty and giving off an insane amount of smell. At this point I'm more or less certain that #4 is a keeper, with the most unique terpene profile out of the 4 females. It smells like rotting candy/fruit with a lot of gas ⛽ it's also a close call between #1&2, as they're very similar to each other yet so different to #4. These two have the sweetest, most pungent smell of blueberries but with very slight differences between them that could change more throughout flush (and even after drying and curing). The keeper from these two will more than likely be decided after drying and curing. One or two of the main cola's on #4 are way too close to the light, with one top bud showing clear signs of burning. When you look closely, parts of the burns are brown as you would expect, and others are bleached white. These are both from heat and light damage, and aren't ideal. But, it's only the one bud on one plant so I'm not going to stress over it. In fact, she's smelling that incredible that you wouldn't even know! Thanks for following and happy growing! 🦊
Likes
15
Share
@BigDaddyK
Follow
Tuesday - added 6ml of A+B , topped up 2 litres of water Thursday - changed Solutions They are looking so fat - loving life This week I’ve added 30ml A+B to Plant 1 and 20ml to Plant 2
Processing
Likes
19
Share
Still week 4 technically
Likes
1
Share
@Mrdub
Follow
Holy shit this girl is tall AF but I'm pretty sure it's the strive nutes I been using I think to much nitrogen has made this girl very stemmy not a lot of but bud sights but the ones she has are pretty fat this girl might out grow the tent lol she has a little smell but not much yet and growing like a weed lmao she has gorgeous stretch of 24 x 32
Likes
42
Share
@DrLaggis
Follow
🌱 Day 29 - First Day of Flowering Phase 🌱 Hey everyone! 🌿 I'm super excited to finally enter the flowering phase of my first grow! I have to admit, I was quite surprised to see that the plant had already been in pre-flower for three days and are developing really well. 🌸 Current Conditions for the Flowering Phase: Watered today with 800ml + 1ml/L BioBizz Bloom 💧🌿 Humidity: 50-55% 💧 Light: 100% intensity, 50cm distance, 16 hours light, 8 hours dark 💡🌙 Current Issues: I'm dealing with a few small yellow spots on the leaves, which seem to be caused by a calcium and magnesium deficiency.
Likes
9
Share
@Growin_it
Follow
Low maintenance. Just watered this week with cal-mag'd water. Trichomes still nice and cloudy. Harvest is close.
Likes
10
Share
@bazgrow
Follow
I develop an application that measures the THC levels of cannabis and the result comes from 3 photos of buds... Godfather OG measured relatively well, it also measured other strains such as Fat Banana Automatic, Gorilla Cookies Automatic, Northern Lights Automatic,White Widow Automatic and Gelato Auto... See how it works in the video THC Meter... ----------------------------------------------------- Day50 : ----------------------------------------------------- Day air temperature: 28c Night air temperature: 24c Air humidity: 46% No Watering ----------------------------------------------------- Day51 : ----------------------------------------------------- Day air temperature: 27c Night air temperature: 24c Air humidity: 39% PH : 6.4 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day52 : ----------------------------------------------------- Day air temperature: 27c Night air temperature: 23c Air humidity: 43% No Watering ----------------------------------------------------- Day53 : ----------------------------------------------------- Day air temperature: 29c Night air temperature: 25c Air humidity: 39% PH : 6.4 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day54 : ----------------------------------------------------- Day air temperature: 30c Night air temperature: 26c Air humidity: 45% PH : 6.5 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day55 : ----------------------------------------------------- Day air temperature: 30c Night air temperature: 26c Air humidity: 38% PH : 6.4 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day56 : ----------------------------------------------------- Day air temperature: 28c Night air temperature: 24c Air humidity: 40% Flushing Before Harvest
Processing
Likes
7
Share
@x_grower
Follow
Last week I neglected the fertigation beyond the low humidity all that delayed the first topping and leaf burned the most thirsty girls, by the end of the week I had already recovered them and succed topping, they are looking very healthy.
Likes
9
Share
📆 Semana 8: La Auto Pablo Escobar está en su punto álgido de floración. Los cogollos se muestran densos y pesados, cubiertos de una capa de resina que brilla a la luz. El aroma es profundo y penetrante, con matices dulces, terrosos y cítricos muy marcados. Algunas ramas pueden necesitar soporte por el peso. ¡Seguimos creciendo fuerte! 💪
Likes
59
Share
Buds are very sticky. Will harvest on the next visit
Processing
Likes
21
Share
I've cut down on grow at this point as the soil seems to have a lot. I'll feed for another week then think about Flushing. The kalimist will keep getting fed bloom and grow as its only been flowering for about 3 weeks due to taking longer to force flower.
Likes
Comments
Share
Likes
4
Share
@pzwags420
Follow
On day 1 the PH of the reservoir is 6.1. I changed out my reservoir. My tallest cola is 3.25" from the light. Lower colas are mostly 7"-9" from the light. I'm still getting runoff on my right plant at night maybe the low humidity drying out the pots too quick? I decided to lower the flow rate by 1 carrot (total of 2 carrots tightened since first runoff event). The leaves are starting to produce more trichomes :) On day 2 the PH of the reservoir was adjusted the PH from 6.2 to 6.1. My tallest cola is 3.25" from the light. Lower colas are mostly 7"-9" from the light. I'm starting to smell terps when the leaves are rubbed it and smells good :) On day 5 I raised my reservoirs PH from 5.8 to 6.2. I increased my blumats flow by 2 carrots. I dropped my new light on my plants splitting the trunk of the right plant. I used duct tape on the wound and the plant seems okay so far. I smashed a few top colas accidentally and hope they will be OK. I have decided to install the new light after this run when there are no plants in the box. On day 6 The reservoirs PH is 6.2. I installed my new AC infinity carbon filter and increased inline airflow to keep up with smell and humidity/transpiration.. The plants are smelling very nice. The trichomes are increasing and the buds are growing in size. So far the damaged plant shows no negative consequences 😅 On day 7 the reservoirs PH was 6.0 so I adjusted it up to 6.3. I increased the flow rate of my blumat on the right plant by one more carrot bringing it back to its original state before there was a runaway. I turned off my dehumidifier and will monitor my humidity/temperatures going forward.
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm
Likes
4
Share
Likes
6
Share
She’s starting to fall all over because the bud is so heavy n dense