Likes
Comments
Share
They look pretty good again. Two of them are smaller and less advanced cause they got stress due to some burnt leaves and stress techniques, I hope they recover and start growing and fattening again I'm watering twice a week, once with nutrients and once without, just ph regulated plain water Very happy! No plagues or anything so far...
Likes
10
Share
This is day 80 from seed,I will admit I have messed up,and done some pretty cool things with this grow on my own terms.I just need some guidance on current status of growth referring to harvest,I need some advice on how long she has left before I should harvest her She is a beautiful plant.
Likes
8
Share
@ProKush27
Follow
Over the last week I’ve continued with defoliation process and I removed downer leaves that were not developing properly. On day 78 I added support for aide branches on B and C. I started flush of plant C on day 80, so we’ll see how she looks. I keep feeding other plants but I will be starting flush soon. 😎
Likes
10
Share
8/4 Already 4 days passed since the beginning of the week and the Runtz grow so much, she's becoming really tall as you can see, the top bud it's increasing yield and growing new pistils every day, the lower branches looks a bit late flowering, from this week I'm gonna add also extra 200w led and some extra nut
Likes
13
Share
@knicko
Follow
Jetzt sieht man deutlich das die Ladys sich auf die Blüten Produktion konzentrieren nächste Woche werden sie nochmal etwas entlaubt. Dazu haben die einen ordentlichen Stretch hingelegt bin beeindruckt bis jetzt sind zum gluck auch keine Probleme aufgetreten bin sehr zufrieden mit der Sorte bis jetzt.
Likes
235
Share
Lebby was harvested! 🙏 After 5 days drying in a very dry and warm room, I had 65% to 62% in the jars. Ugh. Not opening themfor too long now. 😬 I love smoking the weed already hehehe. 🖤 It's great! 🙏 I think I harvested just in time, there are no seeds to smell when the weed is burned. Without the nanas I would've waited one more week. But there are really nanas all over. 🍌 My fault, my pH pen broke and I didn't recognize how much pH minus I used.. Also I forgot to water once when I had the flu. 😰 But I got a much better pH and EC pen now. 🎉 🎊 This lady needs a bit of dedication during veg and during stretch, but then she pretty much dances on her own. 😍 💃 Thanks to all of you, to SSSC, to the Gods and to the predatory mites! 💚 I'm just the tool. 😉😇 Look at the seeds, they are super beautiful, little miracles. 😍 Each holding so much potential, ready to burst into existence. ✨ ____________________________________________________ SPECIAL DIARY CONTENTS: Week 1: Collecting pollen 🙈+ adding mycorrhizae 🍄 Week 4: Applying LST :👉 Week 7: Emergency supercropping 💪 Week 8: Pollination 🐝 Week 12: my emotional reaction to spidermites 🕷️ 😱 Week 13: my actual reaction to spidermites 🔫 _______________________________________ About Black Lebanon cannabis seeds: Black Lebanon is a real treat for the true connoisseur of old school strains. This is the original Black Lebanon dating back from the 1980's, a true Hash plant. The producer has been busy with this strain since 2008 and selected the best mothers out of hundreds of plants. This strain is made from two original Black Lebanon landraces, a crossed between Lebanon #1 and Lebanon #5. Of course we took into account our desires towards quality, potency, taste, effect and of course a good yield. 😊 😇😍🧞‍♂️ 💫 We are very pleased and proud with the successful breeding results. Black Lebanon is one of the strongest landrace strains from Lebanon. She is naturally very resistant to high temperatures and dry climates thanks to the Lebanese landrace genetics. The plants are very dark green with some leaves showing purple colourations. Some can look almost black. This makes these plants a real treat for the eye. The spectacular appearance is enhanced by the glittering white resinous trichomes which really stand out against the dark foliage of the plant. The taste is a little fruiter than the original Black Lebanon, more flavoursome with less of an earthy taste. The production levels are medium to high, depending on the growers skills and lights used. We recommend a minimum of 600W per m2 of HPS, or perhaps around 400W/m2 of quality LED. In optimum conditions 500 gram per m2 is possible. She grows between 80cm and 1.50 m tall and is also very suited to the SOG grow technique. SCROG is possible but takes longer because she isn't the stretchiest of strains. Black Lebanon is very sticky and resinous with THC levels reaching in between 16% and 22% The indoor flower period is around 60-65 days. Outdoors she can be harvested around the middle of October. Indoors, she is very resistant to stress and high temperatures. The genetic background is very strong and the team were surprised and impressed with the resin levels, terpene profile and bud production. It's not very common to see a plant this vigorous with such growth speed. So if you want to impress yourself and your stoner friends try it out now and enjoy the relaxing vibes and old school memories from the 1980's. get it here: https://supersativaseedclub.com/cannabis-seeds/black-lebanon.html#/26-seeds-3_feminized_seeds
Likes
126
Share
@nonick123
Follow
Día 34 (19/02) Pasamos a 12/12 😁 Riego 1,25 Litro H20 + Wholly Base 2 ml/l + Solid Green 1,5 ml/l + Rise Up 1 ml/l de Gen1:11 TDS 875 PPMs - pH 6,28 Día 36 (21/02). Las plantas están explotando en crecimiento vertical! 2,5 cm al día 😍💥 Dia 38 (23/02). Riego 1,25 Litro H20 + Wholly Base 2 ml/l + Solid Green 1,5 ml/l + Rise Up 1 ml/l de Gen1:11 TDS 875 PPMs - pH 6,28 He decidido subir el riego a 1,25 litros porque se muestran sedientas! Día 39 (24/02) Muestra las preflores y no para de estirarse! 😍😍😍🐎 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
26
Share
Same regime i did add rose bloom for a 1 time feed. Dug a inch or so around the root and 1 inch or so hole by the pots edge. Recovered with soil then watered. I did not like the effects tho. It made a bunch of leaves change colors like they had p and k deficiencies. Stalks and viens got red but went back to normal after another watering with just 6.3 ph water
Likes
11
Share
Hey everyone :-). This week she continued to develop very nicely 😍. She was repotted and I started with LST training and topping 😊. to repot there was 2.5 g GHSC powder feeding to 1 l coco. The training took it very well and after 1-2 days it grew again immediately 👍. This time it will be an extreme bush 😂👍. It was poured directly after repotting Otherwise there is nothing to report this week. I wish you all a lot of fun until the next update. stay healthy and let it grow 😀 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
Comments
Share
Culture facile sans aucun soucis belle plante tres esthétique une merveille pour les amateurs de gout fruité
Likes
3
Share
@zulya
Follow
les 2 petites sont dans la serre 😀. le maintien du climat est plus facile que je ne le croyais, j'ai commencé les nuits et j'ai ramarqué que le taux d'humidité relative est plus simple a stabiliser. la nothern lignts est plus grande en taille que la stress killer et rattrape un peu son retard. j'ai fait 2 essais différents, pour la pousse, la stress killer est dans son pot definitif. La nothern light est dans un gobelet en carton pré-percé : pour constater, ce qui est le plus efficace. Mes doutes maintenant, se porte sur l'arrossage, j'ai peur du surarrosage. Et je me doute que si il n'y a pas assez d'eau que ça cause un retard de croissance. donc je mets peu d'eau. la temperature extérieur monte espérons que ça le fasse^^
Likes
16
Share
CLOSE!!!!!! she is absolutely friggin caked with trichs!!!! just need her to plump up a little so we got some weight to her but she definelty looks potent af!!!!! only issue this run really was the stretching. I have a theory about why this happened and will test it out next crop, got the next ladies germed up already. I think removing the third fan allowed it to be to calm in there and the ladies to stretch more, this is just a theory i'll test out. If i had the space, i wouldnt mind the stretch but being in my little 5.5 x 5.5 tent i cant waste any space!!! am i going to break the tent record of just under 800 grams dried? probably not lol but lets hope for 600+
Likes
6
Share
Start of week 4. Week 3 went well, plant is nute hungry and leaves are a bit droopy, but buds are filling out nicely. She is getting sticky to the touch and she has a light sweet aroma.
Likes
49
Share
@Ferenc
Follow
Day 64, 22nd of November 2021: Hi there! Here we go..... so basically pistils are appearing stronger this is the 2nd weeks since they started producing pre flowers. The plants getting a bit light might be some air circulation problem? However they look good and of course closer to the end the gettin' older so the leaves also die. Set up and timing is the same since flower season started. ViparSpectra XS2000 is on full power which is 240W so 100% capacity. Ventilation: 12 hours period when the lamp is on it switches 1 hour on and after one hour off mostly to keep the temperature and of course because of fresh air flow. When the lamp is off it switches on in every 2 hours for 15 min at the same time with the extraction fan. The extraction fan is on 12 hours when the lamp is, and then it switches on in every 2 hours for 30 min. That's all a bit more water for them from today also. Humidity quite the same approx 50%, temperature as well approx 26-27 Celsius. Fertilization remains the same since last week, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week.
Likes
10
Share
@Turbo420
Follow
This week I did a single topping at the 5th node. Along with this I applied low stress training and tucking to expose the new growth.
Likes
6
Share
Likes
26
Share
This is the end of week 4. So day 28 from planting. This has been a wonderful week. As you can see they are extremely bushy and happy. I do have 2 short ones. However My tallest one is now 22 inches, the shortest one is 11 inches, but on average they are about 18 inches. I did some more LST and some defoliation this week. They have a minimum of 6 tops and some have 11 tops. I am still on a twice a week feeding schedule and it will be like that until they begin to flower. They are some really happy plants right now.
Likes
14
Share
ALMOST TIME. TOOK A PEEK AT THE GERMINATING SEEDS AND SOME ARE POPPING OPEN. PROBABLY TOMORROW APRIL 23RD I WILL START PUTTING SOME IN THE SOIL👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
12
Share
Week 7 Mars Hydro TS1000 has arrived. plants starting up te flowering stage. did some light defoliation.
Likes
54
Share
this one was a fun easy journey, a crispy ending one with not so bad results but just not the ones i was expecting from her, mb wen dried and cured she will show a side she is not showing so far. but over all easy growing and maintaining.