Likes
Comments
Share
@deseed_uy
Follow
Hace una semana pasamos a flora, hace mucho frio asiq incorporamos una lampara de ceramica para reptiles, que solo da calor. Apliqué tricodermas foliar esta semana para prevenir hongos. Les puse unos clips lst a algunas ramas que se venian estirando bastante mas que otras asi no tengo tanta diferencia de altura entre ellas
Likes
41
Share
@Haoss
Follow
Buds should be dried in the dark at 20 degrees in 50% humidity 👌
Likes
38
Share
@GroloCup
Follow
She's moving along into flower and I've started using a little bloom nutes now that the stretch is tapering off. Took off a few fan leaves that were blocking some bud sites and removed some lower growth that wouldn't make much more than underdeveloped larf. She's definitely crowded in the tent, but she's continuing to go through her paces and should stay on track. She's starting to effervesce and it's a sweet earthy note with a more skunky stem rub. Lets see where this week takes us!
Likes
27
Share
I was in a hurry to harvest because of the aphids. All buds was washed and finally the affected buds were throw away. The smoke is smooth and nice. im happy of the 82gr
Likes
9
Share
@Rastaluna
Follow
Helloo, planties are roughtly 3 week into vegetative growth. Into second week our cat snucked into the tent and being the motivated gardener she is, dug out quick one and speedy chille, we put them both back into place gave planties some water, and with time they recovered, speedy chille got most stress, but being photoperiod, recovered slowly aswell, still the shortest and very loved. :) so everythings good Royal kush has the strongest smell of them all, few leafs we defoliated we grind in our hard and smell a deep green canna scent. Northen lights is the leader in hight since begining When planties grew 5 tops we topped them, began doing LST and a bit of defoliation, bended stems away from the lamp and taking off leaf that blocks light reaching tops. The stems hardened and remind me now more of a tree
Likes
30
Share
~ FASTBUDS TESTER #2203 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 1/19- Here we go into Week Four of flower and these testers are ON FIRE!🔥🔥🔥 Both testers are in a flower frenzy and are ready to eat! Today I gave both girls their last top dressing with Down To Earth 4-8-4 Flower Mix at a ratio of 2tbsp/g and Coast of Maine's Stonington Blend 5-2-4 Organic Plant Food at a ratio of 1tbsp/g which I simplified by using 1/3 cup of the 4-8-4 and 1/4 cup of the 5-2-4 in the 4g pot and 3/8 cup of 4-8-4 and 1/8 cup of the 5-2-4 in the 3g pot. After working the amendments into the medium, I watered it in with 1g of straight de-chlorinated water ph'd to 6.6 @ 74℉. It will take a week for the microbes to begin breaking it down and will last for 3-4 weeks after that which should coincide with them finishing up, or close to it, enabling them to naturally 'flush' themselves out. I've also increased the power to the HLG 650R's the the Trolmaster Hydro X Controller to 75% which has them pulling 990w at the wall and have them hung 32" above canopy. I also starting adding in 4 hours of UVA during the middle of the light cycle for the remainder of flower. I've been monitoring their leaf temperatures and they're running 71-73℉ which is perfect! I have the AutoPilot APC8200 co2 Controller set to 1100ppm with a 100ppm window and the AC Infinity Cloudline T6 controller set to maintain a 74℉ temperature in the tent while the lights are on. 1/21- I'm watering these thirsty girls daily with straight de-chlorinated water ph'd it to 6.6 @ 74℉ and they're both thriving! The #1 pheno stays in a perpetual state of 'praying' and remains the 'Frost Queen' in the run she is a VERY happy girl! The #2 pheno, while different from her sister, is looking gorgeous and starting to really ramp up her trichome production! 1/23- I watered/fed both testers today with 0.75g of de-chlorinated water each with GreenGro's Natures Brix, Granular Myco and Flower Finisher mixed in, after which I added 1 tsp/g of unsulfured molasses and then ph'd it to 6.6 @ 74℉. They'll be getting straight water from here moving forward as the medium has enough food in it to support them until they finish. 1/25- Daily watering continued today with both girls receiving 0.75g of straight de-chlorinated water ph'd to 6.6 @ 74℉. OMG they're both looking fantastic with both looking amazing with a generous coating of trichomes covering their flowers, especially on the #1 phenotype and both have developed a funky sweet, creamy aroma! I'm really looking forward to Week Five of flower where these ladies should start to look epic! 😍💚 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Much love 💚 and Grow Strong! 💪😎🤙
Likes
47
Share
@S2340420
Follow
Sorry guys bt things have been a bit slow hoping tonflionthem around the 18th 20th
Likes
31
Share
@TacoKart
Follow
Training: added trellis for ScrOG training, continuing topping and defoliating and going well. Concentrating on low stress training mainly. Pheobe still runty but tall Janice and Monica are bushy but need more height. Rachel is mostly large fan leaves. Continuing to water until overflow and seems to work just fine as a watering schedule.
Likes
13
Share
Welcome to my Strawberry Cola Auto by Exotic Seeds Both SCA are nearly on the same track. I uprooted 1 and decided to put them both into 1 8L pot. As the plants grow i'll LST them 1 to 1 corner and 1 at the other end. Before they progress too much into their veg, the 8L of soil in an 18L pot. Without disturbing the soil as much as possible. I have something i put down the sides of the pot and upturn them bringing out the whole base of the substrate sides without the sub falling away from the sides, then they'll be transferred directly into an 18L pot. Lifting the sides up, and hopefully this will hinder any excess stress that you don't want to put on any auto as it'll most likely stunt them and hinder their possibility of giving a substantial harvest. Both seeds are on days 5-7. The 7 day old one was uprotted, so I expect a day or 2 stun, so they should be on or near the same growth rate. So far, I really like the way these autos are growing. I had fastbuds straw cola and tbh, I'm not a big fan of this flavour so, hopefully this strain will have something that charges my perspective. Decided to give them a dose of artios touch for any stress. Thanks to my sponsors Mars-Hydro & Spider-Farmer for allowing me to use their products. This is my 4th run with the FC 3000 and my 2nd crop with my SE5000. I'll be doing 9-11 mothers and 6-7 autos X 2 so 12-14 autos in 2 stages as the females go through a 4-5 month grow.
Likes
16
Share
week 2 Established a nice root system in this clone, all ready for transplant. Used some azos on the roots and some in soil. 7/29- Added 250ppm of epsum salt and 250 ppm of calmag to 1 gal of water. Fed maybe 2 cups to the plant.
Likes
15
Share
First pistils appear with purple hue even tho my temperatures are pretty high. They're loving the sun
Likes
6
Share
@w00tGrow
Follow
Plant is looking good, budds are getting bigger and give sweet sweet aroma. I have not changed much for last 3 weeks, defolation here there only.
Likes
2
Share
@temk4ru
Follow
Hey everyone, All the buds have been sent to my cozy basement for curing. I cure the dried plants in glass jars, burping them periodically. I maintain a temperature of around 20°C (68°F). This process takes anywhere from 2 to 6 months. I do all this to ensure a smooth and enjoyable experience later on. For consumption, I use my Xmax V3 Pro vaporizer. Cheers, see you all next time!
Likes
3
Share
Likes
26
Share
This thing was very easy to grow. Liked low PPMs in flower. Around 600 was plenty for her. Will report taste and effects when curing is complete.
Likes
7
Share
Just fed water for the last week, had to dry in a drying rack due to lack of space. Nice flowers. Both plants look very similar but both smell different to each other. Both smell nice. Will update.
Likes
12
Share
Primera semana de floración. Sin problemas , marcaron las 3 son hembras. Están bastante sanas , la humedad la educamos a 50% para no tener problemas de hongos.