Likes
47
Share
@GrowGuy97
Follow
This lady got cut on day 63, I am extremely impressed with how she turned out considering she got nothing but PHed water the entire grow! She is extremely sticky & frosty and has a unbelievable smell everytime you open the jar! Definitely one of my favorite strains I have grown so far can’t wait to see how she does using nutrients next grow! If you havnt already I highly recommend going to check out Doctors Choice seed bank for some fire genetics & all around great people! Thanks for following the grow & stay tuned for the Rock Machine & Doctors Choice #1 harvest coming soon! Happy growing friends!🌱✌️🏼🙏🏼
Processing
Likes
Comments
Share
@maxpain
Follow
Week 1 off clones ..organic way
Likes
9
Share
This week these ladies got their first real dose of neglect. I have to get a root canal and been in a bit of pain missed their feeding they looked a little rough. Fortunately about 4 hrs after feeding with GoldLeaf 1 Part Fertilizer they were back to their happy selves. Pictures for this week are from the day after feeding. They definitely were moderate drinkers in veg now we hit flower they are taking in more daily. Also note I feed periodically throughout the day on feed days in this tent to see if their is a difference doing it this way rather than a all at once approach. Stay lifted Stay Blessed and I'll so You...Around_The_F1RE 😎🤙🔥💨
Likes
7
Share
The Weather is getting better the Temps are rising and she grows faster now. I would they shes happy to get direct sunlight. At the End of this Week i saw the first since of flowering. Keep Growing
Likes
17
Share
Esta semana hubo mucha humedad por intensas lluvias ..asi que la planta no ha sido regada ya que el 26/03/24 haré la poda de la planta.
Likes
9
Share
@McGrowin
Follow
Starting to do extremely light lollipopping only for leaves blocking budsites or budsites that will not get enough light Day 35: #2 is starting to smell of limonene. #1 and #3 are like 3-5 days behind #2 in terms of flowering. #3 is very slow and the runt of the bunch. Hoping for 3-5 more weeks of flowering before I cut them down. Will likely cut #2 a few days before the others.
Likes
10
Share
Likes
2
Share
@kissrubb
Follow
Actualización 05/10/2024 ¡Hola, growers! Perdón por no poder compartir las semanas completas, pero poco a poco volvemos a la normalidad. Las fotos que ven corresponden al día 01/10/24 y, como pueden ver, están llenas de terpenos y tricomas por todas partes. Tanto la Fruit Gum como la Biscotti x Candy Rain son dos de las cepas más resinosas que he cultivado y, además, desprenden un olor increíblemente fuerte. La Fruit Gum tiene esos toques dulces y nostálgicos, como a chicle de mascar, que me transportan directamente a mi infancia. En cuanto a la Biscotti x Candy Rain, su aroma es como el de una clásica galleta americana casera, ¡muy intenso! Ambas cepas me están impresionando mucho por su resinosidad y aromas únicos. Cabe destacar que las genéticas de Uktha Genetics me han sorprendido gratamente; los resultados están siendo fantásticos. Eso sí, estas cepas comen como camiones, pero mientras se mantenga un control exhaustivo de las fertilizaciones y del medio de cultivo, no hay problema de sobrefertilización. Pronto cortaremos una de las plantas que está bastante adelantada. Espero que disfruten tanto como yo este proceso y, como siempre, ¡buenos humos para todos! 🌱💨
Likes
68
Share
@Ferenc
Follow
Day 78, 3rd of December 2020: Wao.... such a beauty so lucky I have the red pheno for my bonsai OMG.... So happy! Looks soo good 👍 Great genetics Zamnesia! Nothing much to report but the buds are fattening and getting towards the end. No more epsom salt from this week and I am gonna stop giving nitrogen from the next week.... All good the lamp is now on 11 hours and off 13 hours. Every week 15 minutes was taken off and after 4 weeks here we go. Strated 12/12 and now 13/11 wanted try to imitate the nature as the light days are getting shorter. Happy Growing fellas!
Likes
3
Share
@BetterBud
Follow
Should have trained this one, but at this point just letting it grow. It's near 4 feet tall, going to have a massive main cola
Processing
Likes
28
Share
Day 30 - We are officially in flower now! So I'm upping the Bio-Bloom and Top-Max while making sure not to burn her. Day 32 - Stretching out nicely now. Buds site are starting to form and you can see a little bit of the purple color coming through, very exciting stuff. Leaves are perfect, she is happy and loving life.
Likes
10
Share
@HickNella
Follow
All the buds on plant 1 seemed to have doubled in size this week. She's also starting to get a very sweet citrusy smell. I'm loving how sticky and smelly everything is, especially after trimming.
Likes
25
Share
Ya estamos de nuevo fumetillas, vamos actualizar la cuarta semana de floración de estos ejemplares de dutchfem, Casey’s rollex O.G. Es una variedad predominante indica y la verdad que no es que vayan muy rápidas pero se están poniendo bien de polen. . La humedad esta al 45% la temperatura está entre 21/27grados , y como siempre el ph , ya que es de lo más importante,está en 5,8/6,0. . AgroBeta: 1 ml x L Flowering black line , vía radicular. 0,2 ml x L Beta shark, vía radicular. 0,3 ml x L Tucán , vía radicular. 0,1 ml x L Betazyme, vía radicular. 0,05 ml x L Gold Joker, vía radicular. 0,2 ml x L Silver, vía radicular. . Hasta aquí todo familia 🕸️ , un saludo y buenos humos fumetillas💨💨💨.
Likes
61
Share
I had a burn on my central plant, close to the apical top ... I'm really angry. I admit it, I was an idiot to tinker too much with the lights, and this served me as a lesson .... aaaahh how bad it is when you are inexperienced ... but how do you say: "wrong you learn" .... do not worry ... we are on the wave of the harvest !!
Likes
241
Share
💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 56 and she's just killing💀it👌 👉We are in full on flowering , gotta say the pink to redish hairs have gone away which is a bummer 😕 but the frost 🍦 is strong 💪 So Shit , I gave them just a tad to much nutes on the first few feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Processing
Likes
6
Share
Likes
9
Share
@nurari
Follow
8 неделя подошла к концу, растения набирают цветочную массу. думаю еще пару недель и буду уже отправлять на созревание, в конце августа планирую харвест... Жду увеличения в объеме еще в 2 раза. Одно растение выглядит очень маленьким, за то остальные я думаю будут иметь хороший вес.
Likes
45
Share
My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems.
Likes
2
Share
4.14.25 2nd week of veg! Started tie down method on 4.7.25 going good. Nice healthy growth! Going to start wrapping plant around perimeter of pot.