They look super happy, nothing to complain about.

Pretty simple first week! Seed took 3 nights for the taproot to pop and it was planted in its final pot on day 4. On day 6, it finally popped through the soil and on day 7 the little sprout is starting to grow up. There is a small piece of seed casing left attached. Going to leave it for a day or two. If it doesn't fall off, I'll do it myself. Thanks for stopping by! 🥦

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The Bubble OG plants are looking awesome! My tallest one is stacking up with super dense buds. It's crazy to think that the other one is almost ready to chop – the colors are so vibrant. And then there's that short and squat one with the purple leaves. It's definitely the oddball of the bunch, but I kind of like it. The past few weeks have been so beautiful, watching the plants grow and change. It's amazing how something so small and fragile can turn into something so strong and vibrant. Now that they're getting ready to bloom, it feels a little bittersweet. I'm so excited to see the finished product, but I'll definitely miss having them around while they're growing.

I have made it 45 days of curing. Before that she dried for 14 days in a environment controled room and I have to say now this shit is fire. Made it to the top 3 photo periods that I have grown for effect, aroma, flavor and looks. Very potant cerebral euphoric high that settles down into a very relaxing body stone. After opening or even smoking, it leaves the room smelling of baked sugar cookies

Week 8 (17-3 to 23-3) 17-3 Temps: 17.4 to 21.9 degrees Humidity: 60% to 72% 18-3 Temps: 17.5 to 22.2 degrees Humidity: 54% to 65% 19-3 Temps: 17.9 to 22.4 degrees Humidity: 52% to 61% Watering: Both 500 ml. EC: 0.4 Watering: Both 1000 ml. EC: 1.4 Defoliated both plants and attached some shoots to the rack. 20-3 Temps: 18.2 to 22.8 degrees Humidity: 59% to 69% 21-3 Temps: 18.5 to 23.4 degrees Humidity: 57% to 67% Watering: Both 1000 ml. 22-3 Temps: 19.4 to 24.1 degrees Humidity: 55% to 67% Watering: Both 1000 ml. Set the strength of the light to 50% 23-3 Temps: 19.8 to 24.8 degrees Humidity: 58% to 67% Watering: Both 1000 ml. As you can see, instead of removing the leaves, i tucked down all the leaves to open up the canopy. I will see if i like this method as its the first time i try this. I also attached some more shoots to the rack, its looking nicely spread out now :)

Non riesco più ad aggiornare il diario come sempre comunque è stata una settimana bellissima! Ogni varietà sta completando le fioritura in maniera abbondante. Infiorescenze dure e molto resinose si formano in ogni parte delle piante. Sembrano tutte XXL di dimensioni! Molto profumate ogni varietà ha il suo raffinato aroma, non manca molto alla fase finale della fioritura. Sono felice di ogni varietà, complimenti a chi le ha create! Un abbraccio a tutti

Good evening to all growers :D! This week was a bit disappointing when I discovered 1 male plant, immediately moved to a separate box (I'm not a killer)... The two bad girls are showing their sex with pistils that are now visible, the largest is very evident while the other with the paint bucket pot has yet to develop... Odor for now nothing but I still have good intentions from :D!!

Finally time has come to chop down plants 1&2. They look ready and trichomes are mostly cloudy with some embers. Both plants weight 750 grams as whole. I would assume there is around 30-40 grams dry on each, but we would have to dry cure and than return with results. 3rd plant can probably go for another week, she looks like she can get her buds bigger, also still many many white pistils. She is looking very promising with very long buds (: 3rd plant chopped after 1 week, weighs 500 grams wet as whole. Joining the 2 other girls in the closet

Well this is 10 weeks from seed.. Have to give her 11 weeks... ANY ADVICE WOULD BE VERY MUCH APPRECIATED🤔🤔🤔 They are fattening up lots of red hairs🤔🤔🤔🤔yea 11 weeks

Mar 31st Week 16 Changed nutrients to straight Dense Bud Compactor 1 gram/ litres @ 900-1000 ppm for 2 days CR # 1 showing signs of root wrought I removed the slimy parts of the roots and will watch closely On April 2nd I will add the rest of the nutrients to the existing solution April 2nd Fresh nutrients today, all nutrients added 8 litres of fresh water + 6 litres of the existing Dense Bud solution @ 1100 ppm CR # 1 is dying due to root wrought I removed most of the roots today. I changed all the water today with this one. I’m hoping to get it to harvest, but things don’t look good. I will probably flush this soon to harvest what I have. CR # 2 is doing fine as far as roots. Buds are smaller on this one but may fill out more with the Dense Bud Compactor. April 6th Switched CR # 1 to flush solution Root wrought was sever and unfortunately 90% of the root mass had to be removed Time to save what I have

I took the smallest 3 on flush, water only. Harvest 3 earlier as day smoke.

Started flush. 2 weeks till harvest.

Getting the chop tomorrow all resin glands are milky with a few ambers on the buds. Not had a single problem

Week 7 of flower in the books and we’ve had to adjust to the height issues in an attempt to salvage what we can of the largest mains on the cheese. Really should’ve done this 2 weeks ago and while it’d be preferable not to supercrop this late in flower - there really wasn’t a choice. It was done early in the week and the plant is none the worse for wear. On the whole, the nute burn issue has been rectified and while the damage isn’t massive, it’s still really obvious. For all the above reasons, We’re really not going to get that late flower look with this plant. Kinda sad there. Otherwise, the plants have begun to colour up and were quickly coming in to the harvest window. At this rate it looks like the gorilla cookies and cherry Bomb will go off first, with the cheese to follow and the lemon haze last. The GC is absolutely covered in trichs. We expect a great finish for this one. She’s unlike any pheno I’ve seen on here - ducksfooted with a pineapple shape to her heads but again, got it where it counts. The cherry Bomb is similar but also true to her description - huge cherry diesel scent coming off this plant. She’s chunky and sticky too so very pleased she’s made something of herself. The lemon haze is developing And rounding out slower. Trich production is moderate and I suspect she’s got a week longer than the rest. We’re getting there - maybe a week to 10 days. Almost time for jazz hands👍😎. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

Sundae Driver (Fruity Pebbles X Grape Pie) - This time did a mild prune, really loving the Kyle Kushman technique, definitely gonna save time on dry trimming.

Hello everyone growers <3! This has been the most stressful week of all factors for these bad girls... But I see they are acting like: "DragonBall's Freeza when he had his tail cut off and got up off the hill despite all the blows"

✌️🏻Coming on good glad to have the space now