Likes
Comments
Share
@Seedler
Follow
Well i ran into some problems, water temps too high over the weekend (i wasn't there) but roots and plant still looked healthy despise 24,5°C water temp over 2 days. I added 2,5ml each Hydro A & B on day 15. EC rised to 0,89 / PPM 445 and two days later ppm still the same i guess because the only part of the root touching the water couldn't uptake any nutes because of the high water temp? (everything above the water looks healthy af tho) Since my apartment is usually really hot in the summer i bought a TEC peltier water cooler + pump and a thermo regulator to ensure the water temps will stay between 20 and 21°C. i just need to wire that up and diy saved me me a lot of money. i payed about 100€ and have automatic temperature control and a cooler from amazon about 200+ € so i think its fine. I'll show you the set up once it's completed and works. Its the best budget cooling i could get my hands on imo. Today is Day 19 my parts came and i really managed it to half ass wire shit and not burning down something. wish me luck. I payed a total of 93,22€ and now got a really quiet, 150w DIY Peltier/TEC) cooler that automatically turns on once the water temp hits 21°C (69,8F) and stops when hitting 20°C. So far its working REALLY well. like im amazed and so proud i managed to do that and it was pretty easy. i had big problems with temps in my attic flat and water temps quickly rising to 24° and more which means root rot. Since i use the cooler all new roots just looking healthy as fuck. the plant is growing well and i see every day progress. So i saved a shit ton of money. the cheapest water cooler i could find on amazon was around 350+€. Sure it bet it works better, is safer to touch, not very likely to cause burning down my house because i had to twist copper wires together and let 230V run trough it BUT no way i have that much money for things like that. The cooler cools water temps from 21,5° to 20° in about 15minutes. the longer it runs the better it cools. i bought a temperature controller outlet ( 25€) which let me set 2 temps and it turning the cooler on and off. I had to cool it down manually every 2 hours before with frozen water bottles💀 So here are the stats for day 19: Water Temps: 20-21°C / pH: 5.42 / PPM: 485 / EC: 0.96 / height: 2,5cm (lol) (i added some more Hydro A and B because i thought i maybe see some nitrogen deficiency) i bet i will see some RAPID growth now since everything is dialed in, hopefully lol 150g im coming!
Likes
17
Share
@SkyWhal3
Follow
First time growing the sticky and decided RDWC was worth a try. Took longer than I wanted to, to get the RDWC done. Pics are day 8/9 after RDWC Transplant. ChemCookies on the left (larger one) started sprouting about 2-3 weeks before I was given a seed of Compound Genetics Apples and Bananas. Took about 3 more weeks to get all the equipment set up so they have been chillin' in soil for quite a while. Going to SCoG when the net gets here. This is an odd grow, the next round will be the same strains and germination schedule. Think Ill veg them for another 1-2 weeks then put them into flower.
Likes
15
Share
@AdamCajda
Follow
Once again girl are stretching like crazy and had to be bent to avoid heat issues. Couple of branches snapped but luckily survived with some tape aid, I keep defoliating quite heavily other everyday but it's still jungle, one bigger defoliation coming on program today. I feel like the buds are forming pretty slow but that's probably because I look at them evey 2 hours haha Apart from the height issues and little bit of heat stress on the top no known issues :) Will update with some pictures tonight. thanks for checking <3
Likes
23
Share
@Gram_Solo
Follow
👊👽👊 Shooting up now the runtzzzz! 🚀 Got them on 20hours of light now still under sf2000 💥💥 Seem to be smashing it! I can see some yellowing pale leaves appearing so think I need more nitrogen next feed. I let them dry out this week until I fed them again as it could have been overwatering. So how they do this week 🙌 Temp has been good Steady at 24 day and 20 night Humidity around 58% Also Added another desk fan to help airflow abit Plagron Nutrients Green Sensation now added for flower!❄️❄️❄️👽👽👽
Likes
5
Share
Die 3x Z-Up Autoflower von FastBuds sind sehr schnell gekeimt. Sie wurden in einem Glas mit klarem Wasser gekeimt. 💦 Es hat ~3 Tage gedauert. Dann ging es in den Lightmix von Plagron.
Likes
8
Share
@Organic_G
Follow
Wachsen soweit super, kein Top Dressig kein anderen Dünger sonst verwendet, Erde einmal angereichert und läuft Super sind Glücklich. Hätte tatsächlich nicht gedacht das die das Zelt nochmal so füllen würden wie beim Run zuvor mit 6 Pflanzen aber da haben wir es… werden morgen von unten nochmal leicht entlaubt ansonsten war’s das bis zur Ernte. Nothing to do at this point.
Likes
43
Share
I was able to move my light up an additional 5-6 inches I think i am going to need for the stretch during flower. The ladies are 30 inches tall before tucking under screen at 27 inches from the coco. switched feed from veg to bud after a clean RO water only feed a few days prior to switching from 18/6 to 12/12 light cycle. One side of the tent (V on left) smells like spicey lemon and herbs. The other side (blue nemo on right) smells like blueberry and skunky berries. I love how it hits my nose when I open the tent now, and really notice the scent notes changing as I pan over the canopy to take a video.
Likes
14
Share
@RunWithIt
Follow
No issues with this plant, awesome buds with awesome scent and flavor! Super easy to manage during growth. I'd definitely recommend this strain.
Likes
64
Share
@Prof_Weed
Follow
Heute startet die 9. Woche,nicht wie hier vermerkt die 12. Woche. In paar Wochen starte ich dann mit Final Part von Terra Aquatica und Flash Clean um zu flushen. Anscheinend braucht die 11 Wochen Blütezeit laut FastBuds Website. Die Buds werden langsam fetter und die Pflanze ist super gesund. Ec Wert des Wassers steigt von anfänglich 1.5 immer auf 2.5 sobald der Wasserstand runtergeht. Muss nach 2,3 Tagen immer ein wenig Wasser dazugeben. Die Temperaturen sind für Indoor immer noch zu hoch,die Luftfeuchtigkeit ebenfalls. Werde das nächste Mal Indoor erst im Oktober starten, wollte aber mal sehen wie das im Sommer funktioniert.
Likes
59
Share
Was für ein toller Strain. Die Pflanze wuchs von Anfang an sehr stark. Sie brauchte wenig Nährstoffe und hat sich nach nur 4 Wochen Vegitationsphase sehr schnell entwickelt. 7 1/2 Wochen nach Umstellung auf 12/12 war sie für meinen Geschmack fertig. Sie ist voll von Trichomen und der Duft erobert innerhalb von Sekunden den Raum. Jetzt darf sie Trocknen und fermentieren. Sobald sie fertig ist gibt es einen Rauchbericht. Wirklich sehr zu empfehlen!!!!
Processing
Likes
25
Share
The plants finally made it out to the garden. They don't look the greatest because of the stress from getting them out there and transplanted, but it's finally done! I made a video to go over almost everything, but I do want to say I didn't mention that I also mixed about 5-10% Biochar in with the Fox Farm potting soil. Also, the Agribon row cover will protect against pests as well.
Likes
5
Share
@alafmalaf
Follow
Pruned and started ferts this week. 0 sign of insects, we are good, for now....
Likes
33
Share
Super ! Starts flowering 🌳
Likes
2
Share
@nickeri
Follow
18.7.2k24 New start maximal flowering with Plagron Green Sensation. Cutting large leaves for maximum air flow..🚁 🌿🌸🌹
Likes
12
Share
Week 5 of flower update and this was not a good week at all. The light burn got progressively worse over a 4 day stretch that I was away and couldn’t address it earlier. Torched a few tops pretty good. Likely salvageable but it wont be a pretty finish. The only good news about this is that my 2 100% keeper plants were either unaffected or only minorly. Went full beast mode and ripped apart the whole system just to cut 2” off the legs, clean, prune and then reinstall everything. We’re also gonna swap the cob light with an xs2000 and sf1000 combo. Same power but room for clearance error. If we’re lucky - we still get to the finish with some quality smoke and an initial sampling of this new F1. Jesus - my issues never seem to end these days….
Likes
23
Share
@Pemidaisy
Follow
Provided my a full dosage of bio boost and nitro which were 2ml/l and 5ml/l respectively. Will be moving away from the nitro as of next week, just wanted to give the plants their last nitro supplement as they enter flower. My humidity is fluctuating between 58-64 at the moment, but since added a bigger fan to bring it down as far as possible. I’ll be tweaking things over the next week or so to see if I can bring it down to 50. Don’t have a humidifier and will not be able to get one for this grow so knew this was coming. I have a few tricks up my sleeve but need to test them out not sure if it will work. The plants are very healthy with no signs of deficiencies at all, other than a few nibbles on the plants which I have since taken care through my tea application. My focus this week is to: 1. add another light(150 true watts) to my 256 true watts to cover 0.9m2. Need to add a new plug and extend to the cable to do so. 2. Reduce humidity as much as possible 3. Continue LST and tucking of leaves Will be installing the light on 13/4/2021(tomorrow) as I got all the parts I need. You can actually notice the brighter spots in the tent is those with the most growth that’s why installing a new light is now priority. Day 31 - added additional light but now my temperatures has increased. It looks like it’s settling on 30-31 degrees Celsius. Day 32 - starting to dial in with the temp and humidity. Open some vents in the tent to lower temp but has increased humidity. However switched my lights off time from 12-5pm so that my temp doesn’t exceed 29* Celsius Day 35 - humidity and temp seems to be under control now. Getting between 45-55 humidity which I’ll gladly accept. Have a small concern for one of my plants. It’s displaying my symptoms of underwater or windburn but will keep an eye on it.
Likes
Comments
Share
@Comfrey
Follow
Die Ernte ist zwar lange her, aber ich wollte das Album noch abschließen. Leckere Blüten.