Very easy genetics did only topping at 21st day and just light feed throughout,she is very thirsty for cal-mag from early flowers ,not very much purple going on but i can see some pink going around ,produced very big colas ,now whole plant hanging to dry for about 7-10 days and will update soon 🌞🌞💚✂️😍 End result im pretty happy with love the purple colours too will defo run this again 💚💚💨🍑

this strain grows really easy with not much effort just fimmed her once and used scrog net in flower and she turned out well she gets nice and bushy and fills in well towards the end can recommend to all growers new and old as she is a forgiving strain thanks for reading happy growing guys

Chugging right along, the buds on this one are miniscule compared to the pot-mate's. Makes me wonder if it's a slower genetic, or just a low yielder. No top feeding again, except for the Tropicana Cookies is the 1 gal. 12 hrs 45 minutes on.

Hey there, as the clones are almost ready and I will transplant them in the aeroponic system tomorrow, I allowed myself to get the pH and EC ready and stabilize it over a night. 😏 August, 20th: 23 of the 30 clones made it to the system and are now growing fine. Guess those 7 clones that didn‘t make it were old ones from below the mother plant. SanLights at 40%. ☀️

Overall I enjoyed this grow and learned a lot about living soil. Going for a slow dry, trim, then at least a one month cure. Hopefully another six days and I’ll update with a dry yield. My next batch is already cooking but with 5 gallon pots. 03/25 - Day 7 Drying B & C are done drying and have been in jars for a day now with RH ~60%. Total 3oz from B & C. Total 1.5oz from A & D

Start of week 6. Smell is getting strong, lots of trichomes forming now and buds starting to swell.

one plant Corn bread.. is 17 months old.. the rest are 2-two months old. first week of documentation. start of 3rd week of flowering..16th day of flowering having an insect problem. showered plants with neem oil and soap need to get rid of mites and aphids need to better the feeding regimen need to prune and re arrange plants -----as for the room i need to cut two more 6' holes in central duct to place exhausts for third and fourth flowering lights and carbon filters. hook up portable a/c in storage room..use plastic wrap to seal in room .. exhaust heat from a/c out of seconadry window and make n intake from the bottom of the wall with the doorplace air filter over hole...collect water from a/c dripping

You can see the nice healthy colour from the Seaweed foliar spray last week, Will keep that up bi weekly until first flower. Another 12 gal of water for each plant this week as there seems to be no end to this drought. Added blood and bone meal to keep the plant going well into the end of august. And the weekly Silica Foliar spray. https://www.homehardware.ca/en/10kg-4-10-0-bone-meal-fertilizer/p/5025590?page=search-results%20page https://www.homehardware.ca/en/12kg-blood-meal-fertilizer/p/5025554

This is my first project. I hope to learn a lot from this new experience and get the best feedback from it. Its good to say that i have been applying some work experience in project design and management in this new hobbie.

Day 26 – On the Verge of Flowering We’re now on Day 26 of the grow, and the Sweet Skunk Automatic is entering a critical stage. After nearly four full weeks of vegetative growth, the plant continues to appear healthy and structurally compact. Leaf growth remains vigorous, and the internodal spacing is still tight—a good indicator of strong light exposure and stable environmental conditions. This week marks the likely transition period into the early flowering stage, which typically begins around week 4 to 5 for this autoflowering strain. While no pistils are visible yet, we expect the first signs of pre-flowering to appear within the next few days. Weather Recap & Outlook The past week brought mixed conditions—cool nights and scattered showers slowed growth slightly but didn’t cause any stress symptoms. Now, a more favorable pattern is setting in: • Daytime highs are climbing steadily toward 24–26°C • Nighttime lows remain above 10°C, reducing root zone stress • Plenty of sunshine is forecasted for the coming days, especially mid to late week These improved conditions should provide the perfect push for the plant to fully enter bloom. We’ll be watching closely for the first white hairs and signs of stretching. The stage is set. If everything stays on track, we’ll enter the flowering chapter of this grow very soon

I water with a lot of water and I plant directly in my mixture of 70% coco, 30% perlite. Water : tap water at 280ppm. I adjust the Ph to 6. Temperature : 24°C Humidity : 60%

Really enjoyed growing this - easy, resistant, and very high yielding.

Bonjour à tous les padawans et maîtres jedis Jour 29 transplant pot de 11 litres et arrosage avec 2 litres d'eau ph6.3 à laquelle j'ajoute 4ml de rootboster cellmax et 3ml de cellmax bio 8-2-2 par litre d'eau Jour 32 la plante à formidablement bien récupéré je décide donc de pratiquer le main-lining (voir video) Pour cela et ce pour la première je décide de couper après le cinquième nœud car le souhaite avoir un tronc vigoureux pour qu'il puisse soutenir la structure qui j'espère sera conséquente

Week 6 Veg Report – Runtz We Meet Again! Another week, another step forward in our Eternity Grow Cup 2025 journey, and oh boy, do we have a lot to unpack! These Runtz girls are showing their potential, and we’re dialing in every little detail to ensure they thrive. Let’s dive deep into everything that happened this week! Cal-Mag Deficiency Adjustment – Pheno #5’s Special Needs This week started with a close inspection of our phenos, and we noticed that Pheno #5 was showing early signs of a calcium/magnesium deficiency. Whether it was slightly off VPD levels or this particular plant being more demanding, we decided to correct it by increasing the dose of RO Water Conditioner. Now, while this isn’t a direct substitute for Cal-Mag, it does contain trace amounts that can help stabilize the situation. 🔬 Understanding Cal-Mag Deficiency: Calcium and magnesium are essential secondary nutrients. Calcium strengthens cell walls, preventing issues like tip burn and weak stems, while magnesium plays a critical role in chlorophyll production, allowing plants to efficiently absorb light energy. 💡 Signs of Deficiency: • Yellowing between veins (Magnesium) • Rust spots on leaves (Calcium) • Slow growth and weak stems ⚡ How We Address It: • Slightly increasing RO Water Conditioner to see if trace minerals help • Keeping an eye on overall nutrient uptake to ensure no lockout • Monitoring VPD (Vapor Pressure Deficit) closely to optimize nutrient absorption Let’s see how she reacts next week! Branching Development – Pheno #2 Leading the Race All five phenos are thriving, but Pheno #2 is showing the most aggressive branching, pushing outward faster than her sisters. However, overall, we’re seeing very uniform growth, which speaks volumes about the stability of these genetics. 🌱 What is Branching & Why It Matters? Branching is the plant’s way of expanding its canopy, increasing surface area for photosynthesis, and maximizing potential bud sites. Well-structured branches allow better airflow, light penetration, and more even growth—key for a successful high-yield harvest. ⚖️ Topping vs. Leaf Bending – The Training Choice Instead of topping, I’ve decided to go with leaf bending for now. This method allows for gentle manipulation of the plant’s growth without causing major stress. Once we introduce the SCROG (Screen of Green) net, this training will help maximize the canopy spread. Moving to the TrolMaster Ecosystem – A Game Changer Big move this week—our Runtz girls officially transitioned into the TrolMaster Ecosystem, and let me tell you, they are absolutely loving it! Under the ThinkGrow Model 1 LEDs, they’re thriving, leaves praying upward, soaking in that optimized spectrum. 💡 ThinkGrow Model 1 LEDs – Why They Work • PPFD of ~400 µmol/m²/s at their level, running only on Channel One • Full-spectrum lighting tailored for optimal vegetative growth • Passive cooling design, keeping temps stable while saving energy Environmental Conditions (Measured on the TrolMaster Tent-X and the AMP-3) • Temp Max: 26.6°C | Min: 16.2°C • RH Max: 77% | Min: 52% • VPD Max: 1.65 kPa | Min: 0.43 kPa • Solution pH: 5.8 • EC: 0.96 • Water Temp: 16.3°C Why These Numbers Matter: • Keeping VPD in check ensures efficient nutrient uptake • pH and EC levels fine-tuned for maximum root absorption • Water temp stable to avoid root shock and slow growth Autopot System Prep – Getting Ready for the Next Phase The week wraps up with us cleaning and preparing the Autopots for their next phase. These self-watering systems will allow the Runtz girls to access water and nutrients at their own pace, optimizing growth as we head into pre-flower soon! A huge THANK YOU to Zamnesia, Plagron, and GrowDiaries for making this incredible Eternity Grow Cup 2025 possible! Also, a big shoutout to my main sponsors, thank you for keeping this journey running: 🔥 Aptus Holland – Precision nutrients for peak plant health ⚡ TrolMaster – Bringing automation and accuracy to the grow 🌱 Pro-Mix – The foundation of strong roots and healthy plants 💨 The CannaKan – Premium solutions for top-tier results Grove Bags – Revolutionizing post-harvest storage & terpene preservation 📜 Ziggi Papers – The ultimate rolling experience And of course, a massive thank you to the community—followers, supporters, lovers, and even the haters. You ALL fuel this journey, and I appreciate every single one of you! 🚀 Good luck to all fellow competitors—watching everyone’s grows is inspiring, and the competition is fierce! 📢 Join the journey on YouTube & Instagram for exclusive content, behind-the-scenes action, and more insights into this epic run! 👊 Let’s keep pushing, learning, and making history—see you all next week for another deep dive into the Runtz We Meet Again grow! 🌿🔥 💚 growers love to all 💚 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

Alright so i got some guanokalong products to try from my local grow shop, i hope it doesn't screw the plants 🙈 after the last update last week we placed some powders on the soil so lets see how it goes the next weeks! The strain is doing great, lots of short internodes with big long branches, these plants are full of bud sites! I never tried a kosher strain before but i do think that this seed bank has a great genetics here, im thinking to monster crop this girls to continue the legacy 💪👌

First week of pre flower. Getting nervous about this transition stage, first plant ever, any advice on how to not screw it all up?!? Also, someone give me some feedback! I think she looks in decent health but I would love some experienced opinions.